10,000uF 63V 35mm dia x 40mm high 10mm pitch Nichicon LQ - £2.80 each.
10,000uF 80V 35mm dia x 50mm high 10mm pitch Nichicon LQ - £4.20 each.
MBR20100CT Schottky rectifier diode 100V 20A TO220 - £1.00 each.
GBPC3502 bridge rectifier 200V 35A - £3.00 each.
BJTs
BC546B NPN 65V 100mA 625mW BJT TO92 - £0.10 each.
BC556B PNP 65V 100mA 625mW BJT TO92 - £0.10 each.
MPSA42 NPN 300V 500mA 625mW BJT TO92 - £0.10 each.
MPSA92 PNP 300V 500mA 625mW BJT TO92 - £0.10 each.
TIP110 NPN 60V 2A 50W Darlington TO220 - £0.50 each.
TIP29C NPN 100V 1A 30W BJT TO220 - £0.50 each.
TIP132 NPN 100V 8A 70W Darlington TO220 - £1.00 each.
TIP137 PNP 100V 8A 70W Darlington TO220 - £1.00 each.
TIP35C NPN 100V 25A 125W BJT TO247 - £1.50 each.
TIP36C PNP 100V 25A 125W BJT TO247 - £1.50 each.
TIP142 NPN 100V 10A 125W Darlington TO247 - £1.50 each.
TIP147 PNP 100V 10A 125W Darlington TO247 - £1.50 each.
MOSFETs
IRF540 n-channel 100V 22A 85W MOSFET TO220 ST alternative for IRF540 - £0.60 each.
SFP9540 p-channel 100V 17A 132W MOSFET TO220 Fairchild alternative for IRF9540 - £0.60 each.
IRFP240 n-channel 200V 20A 150W MOSFET TO247 - £1.20 each.
IRFP250 n-channel 200V 30A 190W MOSFET TO247 - £1.60 each.
IRFP260 n-channel 200V 46A 280W MOSFET TO247 - £2.20 each.
IRFP9240 p-channel 200V 12A 150W MOSFET TO247 - £1.40 each.
ICs
LM3886T amp - £6.00 each.
Polyimide (Kapton) tape 24mm wide 33m roll - £6.50 each.This tape is a brilliant and easy way to make transistor insulators. Just cut off what you need and stick it down. It can be removed without leaving mess behind and won't slide around like silpads etc. No compound is needed.
M3x12 Torx screw - £0.05 each.
Ideal for mounting transistors, Torx screws won't drop off your screwdriver and won't chew up. T10 driver fitment.
M3 tophat insulator - £0.10 each.
Use these insulators with the above screws and tape to achieve a reliable and solid electrically insulated fixing. Either trim the insulator flush with the back of the device or drill a 3.6mm diameter 2.6mm deep recess to your hole.
High performance flexible 0.2C/W individual TO3P/TO247 insulators, no paste needed - £0.15 each.
Lead former for resistors and diodes etc - £6.00 each.
These are brilliant and save loads of hassle and time! Using this tool you will get perfect bends in the perfect place every time. Just lay the component in the appropriate place on the former and bend the legs. The gap in the middle is just the right size to keep 1/4 watt resistors and small diodes centralised. The other side of the former has a gap to suit 1/2 watt resistors.
Audax TW014G1 3/4 inch fabric dome - £5.00 each.
Audax TW025A1 1 inch fabric dome with ferrofluid - £20.00 each.
Audax AT100M0 4 inch paper cone, shielded - £5.00 each.
Audax HT130M0 5.25 inch paper cone, unshielded - £10.00 each.
Audax AP210G6 8 inch composite cone, shielded - £15.00 each.
Audax AP210Z0 8 inch HDA cone, shielded - £20.00 each.
Audax HD30P45TSMC 12 inch paper cone - £20.00 each.
Shadow Works Genesis 12 inch woven kevlar cone 1400W 82mm voicecoil - £150.00 each.
Shadow Works Phantom 12 inch carbon/kevlar cone 1200W 82mm voicecoil 48mm xmax - matched pair £300.00 or £160.00 each.
Please check back occasionally as the items will change.
All content on this website Copyright © 2005-2010 Richard Read, unless otherwise stated. For commercial use please contact me.